Sovol 2 Rolls Filament Dry Box Holder

Sovol 2 Rolls Filament Dry Box Holder

Remove Excess Moisture: 3D printer filaments are hygroscopic, and moisture can cause printing failure. The Sovol SH01, a great addition to your 3D printer, removes excess moisture, keeps your filament dry, and provides better prints. The surface of prints will be smoother, and layer adhesion will increase. No more brittle PLA, PETG, or ABS filament.

Real-time Monitoring of Temperature and Humidity Inside: Displays the humidity and temperature in the dry box in real time. Set the temperature to 40°C, 45°C, or 50°C and the time from 6 to 12 hours. If you use the SH01 in a room with a temperature under 16°C, the temperature in the dryer box may not reach 50°C. However, this will not decrease the drying effect.

Excellent Power-off Drying Mode: Silicone and PTFE seals make it possible to store filaments for a long time without power and protect your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficiency and quality.

Large Capacity: The Sovol dryer box can store two filament rolls with a width of less than 70 mm or one filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for moisture evaporation.

Heating More Evenly: The unique design of the built-in fan in the box is based on the principle of air thermodynamics, making the filament heated more evenly. The SH01 makes drying more efficient. Any questions about the product, please feel free to let us know. Our technical support team will provide service as soon as possible.

You Must Know… Place the filament into the filament outlet. Please note that the direction should be counter-clockwise so that the pulley at the bottom can feed better. If the screen displays two errors, E0 and E1, please open the drying box and check all the cable sockets on the motherboard to see if they are damaged or loose. If there is any problem, please feel free to let us know. We will send a replacement for you.