Single Head Pneumatic Engraving Machine 1400RPM

Single Head Pneumatic Engraving Machine 1400RPM

Operation Direction:

• Turn the pressure regulator fully counterclockwise before powering on to prevent damage to switches, gauges, and valves.
• Turn on the power and switch on the power button (indicator light turns on).
• Use the side reel handle by hand; press the foot pedal to start. Increase pressure gradually with the knob to smoothly control impact from low to high.
• Lock the reel handle; the tool is ready to use.
• For engraving with the handle, use the same procedure described above.
• For rotary engraving with the handle, turn off the power first, then adjust the pressure knob (the foot switch has no effect when the power is off).

Features:

• Input voltage: 110V / 220V
• Power: 80W
• Speed: 1400 rpm
• Air pressure: 0–3 kg/cm²

Maintenance:

• Periodically drain the valve.
• Add a suitable amount of No. 10 machine oil to the side reel handle at regular intervals.
• Do not disassemble if a fault occurs; consult a repair professional.

Weight: 6.9 kg

Notes:

• New arrival of graver jewelry equipment
• Jewelry engraving tool
• Jewelry-making equipment
• On-time delivery