RTX 3090 Backplate Cooler GPU Heatsink

RTX 3090 Backplate Cooler GPU Heatsink

Feature:

1. GPU Integration: The GPU backplane radiator is designed to snap into place easily and is engineered for GPUs such as the 3090. It helps reduce the hassle of complex assembly, provides a straightforward solution for vertical GPU mounting, and helps address overheating memory modules.

2. Whisper-Quiet Operation: Experience quieter operation with this graphics card backplate memory cooler, featuring dual 6010 anodized fans. These fans operate with very low noise even under heavy loads, thanks to their black CNC-machined finish and low noise hydraulic bearings, while PWM control helps fine-tune airflow.

3. Customizable Cooling Dynamics: The graphics card backplane heatsink offers adjustable cooling control through a 4-pin connector, allowing users to optimize fan speeds directly through the motherboard BIOS. With RPMs ranging from 1500 to 5000, it is designed to handle different workload intensities.

4. Expert Thermal Advice: For better compatibility, this video memory VRAM radiator panel works with a 0.5mm or 1mm thermal pad, depending on the backplate flatness. The 15mm thick cooler improves adaptability and supports a wide range of GPU designs.

5. Essential Installation Reminder: To maximize effectiveness, this heatsink cooling fan panel requires a thermal pad during installation to ensure proper heat conduction from the GPU metal backplate. This design results in a total height that includes both the 15mm heatsink and the thermal pad thickness for broader cooling coverage.

Specification:

Product Type: GPU Backplane Heatsink

Item model number: GK6

Product color: Black

Body material: Alloy aluminum anodized CNC

Thermal Pad: Standard ordinary 6W 1mm, Laird 700 0.5mm, or Laird 700 1mm, optional

Bearing type: Oil-impregnated bearing, sleep bearing

Number of fans: 2

Fan model: 6010 bracket

Fan speed: 1500 to 4500 ±5% rpm

Fan interface: Small 4-pin, adjustable by PWM

Maximum noise: 25.5dB single

Fan air volume: 12.2CFM ±5% single

Applicability: Compatible with RTX 3090, 3080, and 3070 series graphics cards

Wire length: About 400mm ±10mm or 15.75 ±0.39 inch

Body size: About 180 x 90 x 15mm or 7.09 x 3.54 x 0.59 inch

Differences between standard 6W and Laird 700 thermal pads:

1. The standard set uses a 1mm thick 6W silicone pad. The 90 x 180mm ordinary silicone thermal pad is soft, durable, and has a thermal conductivity of 6W/m.k. It is almost oil-free, has slightly higher thermal resistance, average performance, and is suitable for game enthusiasts and non-mining use. Suitable for graphics cards with a backplate and cable ties.

2. The Laird Tflex700 set includes one full 90 x 180mm Laird 700 thermal pad with a thickness of 0.5mm or 1mm and a real 5W/m.K thermal conductivity. It offers excellent thermal performance and high compatibility.

Installation Steps:

Step 1: Wipe the back of the graphics card with alcohol paper to remove dust.

Step 2: Peel off the thermal pad and stick it flat on the back of the heatsink.

Step 3: Attach the backplane heatsink to the memory location on the graphics card backplane.

Step 4: Fix the backplane radiator. If the graphics card is mounted flat, the thermal pad has a large area and provides some adhesion, so it can be used directly. If the graphics card is installed vertically, it can be fixed with nylon cable ties or high-temperature rubber bands.

Note:

Due to different monitor settings and lighting effects, the actual color of the item may be slightly different from the pictures shown.

Please allow a 1 to 2cm measuring deviation due to manual measurement.

1 x Graphics Card Backplane Cooling Fan Set