Herdio 4-inch Outdoor Bluetooth Speakers

Herdio 4-inch Outdoor Bluetooth Speakers

About this item

• What you get: 2 Speakers, 2 Mount Brackets, 1 – 120V-240V Power Adapter (15 feet/2 meters), 1 – 12V DC Power Cable, 1 – Speaker Wires (16.4 feet/5 meters).
• Full Range Stereo Sound: Achieve crisp sounds covering the entire audio spectrum! Fill your area with clean highs while feeling the deep bass response from the articulated sound enclosure.
• Versatile Swivel Brackets: To ensure you can place your outdoor speakers in your most desired location, we added easy-install swivel brackets that allow up to a 120-degree range of motion, while the front face can rotate up to 90 degrees. This ensures easy placement and focused sound quality where you want it.
• Product Dimensions (L x W x H): 8.62″ (219mm) (L) x 5.67″ (144mm) (W) x 6.62″ (159mm) (H). Installs easily on walls and the ceiling.
• Multiple Applications: Great outdoor and indoor speakers for your patio, garage, basement, or living room. The weatherproof cabinet has a fashionable design and is made of durable ABS material. The internal cabinet walls are thick with rigid bracing to prevent unwanted cabinet resonances, allowing for clean, clear sound at all levels.

IMPORTANT SAFETY PRECAUTIONS

To avoid potential shorts in the electrical system, be sure to disconnect the (–) battery cable before installation. Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.

When replacing the fuse, be sure to only use a fuse of the rating specified on this product.

SPECIFICATIONS

• Active & Passive Speaker System
• Built-in 2-Channel Amplifier
• 4.2 Bluetooth Wireless Music Streaming
• 2-Way Full Range Stereo Speakers with 1 PEI Dome Tweeter
• Marine Grade Waterproof Construction
• Custom Tooled Design for High Power
• Removable & Rust-Proof Speaker Grills
• Heavy-Duty Engineered Plastic Cabinet

Technical Specs:

• Marine Grade IP44 Rating
• 4†Full Range Speakers
• 1.0” PEI Dome Tweeters
• Magnet Size: 6.0 oz.
• 200 Watt Rated Peak Power
• 100 Watt Rated RMS Power
• Frequency Response: 100Hz-20kHz
• 4 Ohm Impedance
• Product Dimensions (L x W x H): 5.67″ (219mm) (L) x 8.62″ (144mm) (W) x 6.62″ (159mm) (H)
• Package Dimensions (L x W x H): 15″ (380mm) (L) x 8.7″ (220mm) (W) x 11.4″ (290mm) (H)
• Weight: 6.6 lbs./Pair
• Sold as: Pair

INSTALLATION & MOUNTING

• Remove the bracket knobs and the bracket from the speakers.
• Hold the bracket up to the mounting surface. The speaker can be mounted either horizontally or vertically.
• Mark the locations of the screw holes. Use all of the holes.
• Drill pilot holes into the mounting surface.
• Align the bracket so that the holes all line up.
• Use the screws and bolts to attach the bracket to the mounting surface.
• Place the speaker for the best angle, and tighten the speaker by the bracket knobs and the bracket.
• Check that the entire installation is safe and secure.